CN 7219 12 10

The EU publishes default values for CN 7219 12 10 for 29 countries of origin, from 2.57 to 8.67 tonnes of CO₂e per tonne.

Embedded emissions in tonnes of CO₂e per tonne of the good, as published on 31 Jul 2026. They are shown before the mark-up for the year, which is added when they are used. See the mark-up by year

Only the direct emissions of this good count towards the certificates due.

The benchmark, multiplied by the CBAM factor for the year, is the free allocation deducted from the certificates due. It depends on whether the embedded emissions come from default values or from the producer’s verified actual data. See the CBAM factor by year

In tonnes of CO₂e per tonne of the good. A year range limits a value to goods produced in those years.

Flat-rolled products of stainless steel, of a width of 600 mm or more

• 7219 11 00Not further worked than hot-rolled, in coils : Of a thickness exceeding 10 mm
• 7219 12 90Not further worked than hot-rolled, in coils : Of a thickness of 4,75 mm or more but not exceeding 10 mm : Containing by weight less than 2,5 % of nickel
• 7219 13 10Not further worked than hot-rolled, in coils : Of a thickness of 3 mm or more but less than 4,75 mm : Containing by weight 2,5 % or more of nickel
• 7219 13 90Not further worked than hot-rolled, in coils : Of a thickness of 3 mm or more but less than 4,75 mm : Containing by weight less than 2,5 % of nickel
• 7219 14 10Not further worked than hot-rolled, in coils : Of a thickness of less than 3 mm : Containing by weight 2,5 % or more of nickel
• 7219 14 90Not further worked than hot-rolled, in coils : Of a thickness of less than 3 mm : Containing by weight less than 2,5 % of nickel
• 7219 21 10Not further worked than hot-rolled, not in coils : Of a thickness exceeding 10 mm : Containing by weight 2,5 % or more of nickel
• 7219 21 90Not further worked than hot-rolled, not in coils : Of a thickness exceeding 10 mm : Containing by weight less than 2,5 % of nickel
• 7219 22 10Not further worked than hot-rolled, not in coils : Of a thickness of 4,75 mm or more but not exceeding 10 mm : Containing by weight 2,5 % or more of nickel
• 7219 22 90Not further worked than hot-rolled, not in coils : Of a thickness of 4,75 mm or more but not exceeding 10 mm : Containing by weight less than 2,5 % of nickel
• 7219 23 00Not further worked than hot-rolled, not in coils : Of a thickness of 3 mm or more but less than 4,75 mm
• 7219 24 00Not further worked than hot-rolled, not in coils : Of a thickness of less than 3 mm
• 7219 31 00Not further worked than cold-rolled (cold-reduced) : Of a thickness of 4,75 mm or more
• 7219 32 10Not further worked than cold-rolled (cold-reduced) : Of a thickness of 3 mm or more but less than 4,75 mm : Containing by weight 2,5 % or more of nickel
• 7219 32 90Not further worked than cold-rolled (cold-reduced) : Of a thickness of 3 mm or more but less than 4,75 mm : Containing by weight less than 2,5 % of nickel
• 7219 33 10Not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 1 mm but less than 3 mm : Containing by weight 2,5 % or more of nickel
• 7219 33 90Not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 1 mm but less than 3 mm : Containing by weight less than 2,5 % of nickel
• 7219 34 10Not further worked than cold-rolled (cold-reduced) : Of a thickness of 0,5 mm or more but not exceeding 1 mm : Containing by weight 2,5 % or more of nickel
• 7219 34 90Not further worked than cold-rolled (cold-reduced) : Of a thickness of 0,5 mm or more but not exceeding 1 mm : Containing by weight less than 2,5 % of nickel
• 7219 35 10Not further worked than cold-rolled (cold-reduced) : Of a thickness of less than 0,5 mm : Containing by weight 2,5 % or more of nickel
• 7219 35 90Not further worked than cold-rolled (cold-reduced) : Of a thickness of less than 0,5 mm : Containing by weight less than 2,5 % of nickel
• 7219 90 20Other : Perforated
• 7219 90 80Other : Other