Kariqa
Log inGet started
EU Carbon Border Adjustment Mechanism

CBAM goods by CN/TARIC code

Every good covered by CBAM by its CN/TARIC code, with the official default values by country of origin, benchmarks and production routes.

574 CN/TARIC codes in scope

Which goods does CBAM cover?

CBAM covers 574 goods, each identified by its CN/TARIC code, in these sectors: Cement, Iron and Steel, Aluminium, Fertilisers, Chemicals, Electricity.

Cement

2507Kaolin and other kaolinic clays, whether or not calcined

2523Portland cement, aluminous cement, slag cement, supersulphate cement and similar hydraulic cements, whether or not coloured or in the form of clinkers

Iron and Steel

2601Iron ores and concentrates, including roasted iron pyrites

  • 2601 12 00Iron ores and concentrates, other than roasted iron pyrites : Agglomerated

7201Pig iron and spiegeleisen in pigs, blocks or other primary forms

  • 7201 10 11Non-alloy pig iron containing by weight 0,5 % or less of phosphorus : Containing by weight not less than 0,4 % of manganese : Containing by weight 1 % or less of silicon
  • 7201 10 19Non-alloy pig iron containing by weight 0,5 % or less of phosphorus : Containing by weight not less than 0,4 % of manganese : Containing by weight more than 1 % of silicon
  • 7201 10 30Non-alloy pig iron containing by weight 0,5 % or less of phosphorus : Containing by weight not less than 0,1 % but less than 0,4 % of manganese
  • 7201 10 90Non-alloy pig iron containing by weight 0,5 % or less of phosphorus : Containing by weight less than 0,1 % of manganese
  • 7201 20 00Non-alloy pig iron containing by weight more than 0,5 % of phosphorus
  • 7201 50 10Alloy pig iron; spiegeleisen : Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium
  • 7201 50 90Alloy pig iron; spiegeleisen : Other

7202Ferro-alloys

  • 7202 11 20Ferro-manganese : Containing by weight more than 2 % of carbon : With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %
  • 7202 11 80Ferro-manganese : Containing by weight more than 2 % of carbon : Other
  • 7202 19 00Ferro-manganese : Other
  • 7202 41 10Ferro-chromium : Containing by weight more than 4 % of carbon : Containing by weight more than 4 % but not more than 6 % of carbon
  • 7202 41 90Ferro-chromium : Containing by weight more than 4 % of carbon : Containing by weight more than 6 % of carbon
  • 7202 49 10Ferro-chromium : Other : Containing by weight not more than 0,05 % of carbon
  • 7202 49 50Ferro-chromium : Other : Containing by weight more than 0,05 % but not more than 0,5 % of carbon
  • 7202 49 90Ferro-chromium : Other : Containing by weight more than 0,5 % but not more than 4 % of carbon
  • 7202 60 00Ferro-nickel

7203Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms

7205Granules and powders, of pig iron, spiegeleisen, iron or steel

7206Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)

7207Semi-finished products of iron or non-alloy steel

  • 7207 11 11Containing by weight less than 0,25 % of carbon : Of rectangular (including square) cross-section, the width measuring less than twice the thickness : Rolled or obtained by continuous casting : Of free-cutting steel
  • 7207 11 14Containing by weight less than 0,25 % of carbon : Of rectangular (including square) cross-section, the width measuring less than twice the thickness : Rolled or obtained by continuous casting : Other : Of a thickness not exceeding 130 mm
  • 7207 11 16Containing by weight less than 0,25 % of carbon : Of rectangular (including square) cross-section, the width measuring less than twice the thickness : Rolled or obtained by continuous casting : Other : Of a thickness exceeding 130 mm
  • 7207 11 90Containing by weight less than 0,25 % of carbon : Of rectangular (including square) cross-section, the width measuring less than twice the thickness : Forged
  • 7207 12 10Containing by weight less than 0,25 % of carbon : Other, of rectangular (other than square) cross-section : Rolled or obtained by continuous casting
  • 7207 12 90Containing by weight less than 0,25 % of carbon : Other, of rectangular (other than square) cross-section : Forged
  • 7207 19 12Containing by weight less than 0,25 % of carbon : Other : Of circular or polygonal cross-section : Rolled or obtained by continuous casting
  • 7207 19 19Containing by weight less than 0,25 % of carbon : Other : Of circular or polygonal cross-section : Forged
  • 7207 19 80Containing by weight less than 0,25 % of carbon : Other : Other
  • 7207 20 11Containing by weight 0,25 % or more of carbon : Of rectangular (including square) cross-section, the width measuring less than twice the thickness : Rolled or obtained by continuous casting : Of free-cutting steel
  • 7207 20 15Containing by weight 0,25 % or more of carbon : Of rectangular (including square) cross-section, the width measuring less than twice the thickness : Rolled or obtained by continuous casting : Other, containing by weight : 0,25 % or more but less than 0,6 % of carbon
  • 7207 20 17Containing by weight 0,25 % or more of carbon : Of rectangular (including square) cross-section, the width measuring less than twice the thickness : Rolled or obtained by continuous casting : Other, containing by weight : 0,6 % or more of carbon
  • 7207 20 19Containing by weight 0,25 % or more of carbon : Of rectangular (including square) cross-section, the width measuring less than twice the thickness : Forged
  • 7207 20 32Containing by weight 0,25 % or more of carbon : Other, of rectangular (other than square) cross-section : Rolled or obtained by continuous casting
  • 7207 20 39Containing by weight 0,25 % or more of carbon : Other, of rectangular (other than square) cross-section : Forged
  • 7207 20 52Containing by weight 0,25 % or more of carbon : Of circular or polygonal cross-section : Rolled or obtained by continuous casting
  • 7207 20 59Containing by weight 0,25 % or more of carbon : Of circular or polygonal cross-section : Forged
  • 7207 20 80Containing by weight 0,25 % or more of carbon : Other

7208Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated

  • 7208 10 00In coils, not further worked than hot-rolled, with patterns in relief
  • 7208 25 00Other, in coils, not further worked than hot-rolled, pickled : Of a thickness of 4,75 mm or more
  • 7208 26 00Other, in coils, not further worked than hot-rolled, pickled : Of a thickness of 3 mm or more but less than 4,75 mm
  • 7208 27 00Other, in coils, not further worked than hot-rolled, pickled : Of a thickness of less than 3 mm
  • 7208 36 00Other, in coils, not further worked than hot-rolled : Of a thickness exceeding 10 mm
  • 7208 37 00Other, in coils, not further worked than hot-rolled : Of a thickness of 4,75 mm or more but not exceeding 10 mm
  • 7208 38 00Other, in coils, not further worked than hot-rolled : Of a thickness of 3 mm or more but less than 4,75 mm
  • 7208 39 00Other, in coils, not further worked than hot-rolled : Of a thickness of less than 3 mm
  • 7208 40 00Not in coils, not further worked than hot-rolled, with patterns in relief
  • 7208 51 20Other, not in coils, not further worked than hot-rolled : Of a thickness exceeding 10 mm : Of a thickness exceeding 15 mm
  • 7208 51 91Other, not in coils, not further worked than hot-rolled : Of a thickness exceeding 10 mm : Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of : 2 050 mm or more
  • 7208 51 98Other, not in coils, not further worked than hot-rolled : Of a thickness exceeding 10 mm : Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of : Less than 2 050 mm
  • 7208 52 10Other, not in coils, not further worked than hot-rolled : Of a thickness of 4,75 mm or more but not exceeding 10 mm : Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
  • 7208 52 91Other, not in coils, not further worked than hot-rolled : Of a thickness of 4,75 mm or more but not exceeding 10 mm : Other, of a width of : 2 050 mm or more
  • 7208 52 99Other, not in coils, not further worked than hot-rolled : Of a thickness of 4,75 mm or more but not exceeding 10 mm : Other, of a width of : Less than 2 050 mm
  • 7208 53 10Other, not in coils, not further worked than hot-rolled : Of a thickness of 3 mm or more but less than 4,75 mm : Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more
  • 7208 53 90Other, not in coils, not further worked than hot-rolled : Of a thickness of 3 mm or more but less than 4,75 mm : Other
  • 7208 54 00Other, not in coils, not further worked than hot-rolled : Of a thickness of less than 3 mm
  • 7208 90 20Other : Perforated
  • 7208 90 80Other : Other

7209Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated

  • 7209 15 00In coils, not further worked than cold-rolled (cold-reduced) : Of a thickness of 3 mm or more
  • 7209 16 10In coils, not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 1 mm but less than 3 mm : ‘Electrical’
  • 7209 16 90In coils, not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 1 mm but less than 3 mm : Other
  • 7209 17 10In coils, not further worked than cold-rolled (cold-reduced) : Of a thickness of 0,5 mm or more but not exceeding 1 mm : ‘Electrical’
  • 7209 17 90In coils, not further worked than cold-rolled (cold-reduced) : Of a thickness of 0,5 mm or more but not exceeding 1 mm : Other
  • 7209 18 10In coils, not further worked than cold-rolled (cold-reduced) : Of a thickness of less than 0,5 mm : ‘Electrical’
  • 7209 18 91In coils, not further worked than cold-rolled (cold-reduced) : Of a thickness of less than 0,5 mm : Other : Of a thickness of 0,35 mm or more but less than 0,5 mm
  • 7209 18 99In coils, not further worked than cold-rolled (cold-reduced) : Of a thickness of less than 0,5 mm : Other : Of a thickness of less than 0,35 mm
  • 7209 25 00Not in coils, not further worked than cold-rolled (cold-reduced) : Of a thickness of 3 mm or more
  • 7209 26 10Not in coils, not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 1 mm but less than 3 mm : ‘Electrical’
  • 7209 26 90Not in coils, not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 1 mm but less than 3 mm : Other
  • 7209 27 10Not in coils, not further worked than cold-rolled (cold-reduced) : Of a thickness of 0,5 mm or more but not exceeding 1 mm : ‘Electrical’
  • 7209 27 90Not in coils, not further worked than cold-rolled (cold-reduced) : Of a thickness of 0,5 mm or more but not exceeding 1 mm : Other
  • 7209 28 10Not in coils, not further worked than cold-rolled (cold-reduced) : Of a thickness of less than 0,5 mm : ‘Electrical’
  • 7209 28 90Not in coils, not further worked than cold-rolled (cold-reduced) : Of a thickness of less than 0,5 mm : Other
  • 7209 90 20Other : Perforated
  • 7209 90 80Other : Other

7210Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated

  • 7210 11 00Plated or coated with tin : Of a thickness of 0,5 mm or more
  • 7210 12 20Plated or coated with tin : Of a thickness of less than 0,5 mm : Tinplate
  • 7210 12 80Plated or coated with tin : Of a thickness of less than 0,5 mm : Other
  • 7210 20 00Plated or coated with lead, including terne-plate
  • 7210 30 00Electrolytically plated or coated with zinc
  • 7210 41 00Otherwise plated or coated with zinc : Corrugated
  • 7210 49 00Otherwise plated or coated with zinc : Other
  • 7210 50 00Plated or coated with chromium oxides or with chromium and chromium oxides
  • 7210 61 00Plated or coated with aluminium : Plated or coated with aluminium-zinc alloys
  • 7210 69 00Plated or coated with aluminium : Other
  • 7210 70 10Painted, varnished or coated with plastics : Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
  • 7210 70 80Painted, varnished or coated with plastics : Other
  • 7210 90 30Other : Clad
  • 7210 90 40Other : Tinned and printed
  • 7210 90 80Other : Other

7211Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated

  • 7211 13 00Not further worked than hot-rolled : Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
  • 7211 14 00Not further worked than hot-rolled : Other, of a thickness of 4,75 mm or more
  • 7211 19 00Not further worked than hot-rolled : Other
  • 7211 23 20Not further worked than cold-rolled (cold-reduced) : Containing by weight less than 0,25 % of carbon : ‘Electrical’
  • 7211 23 30Not further worked than cold-rolled (cold-reduced) : Containing by weight less than 0,25 % of carbon : Other : Of a thickness of 0,35 mm or more
  • 7211 23 80Not further worked than cold-rolled (cold-reduced) : Containing by weight less than 0,25 % of carbon : Other : Of a thickness of less than 0,35 mm
  • 7211 29 00Not further worked than cold-rolled (cold-reduced) : Other
  • 7211 90 20Other : Perforated
  • 7211 90 80Other : Other

7212Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated

  • 7212 10 10Plated or coated with tin : Tinplate, not further worked than surface-treated
  • 7212 10 90Plated or coated with tin : Other
  • 7212 20 00Electrolytically plated or coated with zinc
  • 7212 30 00Otherwise plated or coated with zinc
  • 7212 40 20Painted, varnished or coated with plastics : Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
  • 7212 40 80Painted, varnished or coated with plastics : Other
  • 7212 50 20Otherwise plated or coated : Plated or coated with chromium oxides or with chromium and chromium oxides
  • 7212 50 30Otherwise plated or coated : Plated or coated with chromium or nickel
  • 7212 50 40Otherwise plated or coated : Plated or coated with copper
  • 7212 50 61Otherwise plated or coated : Plated or coated with aluminium : Plated or coated with aluminium-zinc alloys
  • 7212 50 69Otherwise plated or coated : Plated or coated with aluminium : Other
  • 7212 50 90Otherwise plated or coated : Other
  • 7212 60 00Clad

7213Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel

  • 7213 10 00Containing indentations, ribs, grooves or other deformations produced during the rolling process
  • 7213 20 00Other, of free-cutting steel
  • 7213 91 10Other : Of circular cross-section measuring less than 14 mm in diameter : Of a type used for concrete reinforcement
  • 7213 91 20Other : Of circular cross-section measuring less than 14 mm in diameter : Of a type used for tyre cord
  • 7213 91 41Other : Of circular cross-section measuring less than 14 mm in diameter : Other : Containing by weight 0,06 % or less of carbon
  • 7213 91 49Other : Of circular cross-section measuring less than 14 mm in diameter : Other : Containing by weight more than 0,06 % but less than 0,25 % of carbon
  • 7213 91 70Other : Of circular cross-section measuring less than 14 mm in diameter : Other : Containing by weight 0,25 % or more but not more than 0,75 % of carbon
  • 7213 91 90Other : Of circular cross-section measuring less than 14 mm in diameter : Other : Containing by weight more than 0,75 % of carbon
  • 7213 99 10Other : Other : Containing by weight less than 0,25 % of carbon
  • 7213 99 90Other : Other : Containing by weight 0,25 % or more of carbon

7214Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling

  • 7214 10 00Forged
  • 7214 20 00Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
  • 7214 30 00Other, of free-cutting steel
  • 7214 91 10Other : Of rectangular (other than square) cross-section : Containing by weight less than 0,25 % of carbon
  • 7214 91 90Other : Of rectangular (other than square) cross-section : Containing by weight 0,25 % or more of carbon
  • 7214 99 10Other : Other : Containing by weight less than 0,25 % of carbon : Of a type used for concrete reinforcement
  • 7214 99 31Other : Other : Containing by weight less than 0,25 % of carbon : Other, of circular cross-section measuring in diameter : 80 mm or more
  • 7214 99 39Other : Other : Containing by weight less than 0,25 % of carbon : Other, of circular cross-section measuring in diameter : Less than 80 mm
  • 7214 99 50Other : Other : Containing by weight less than 0,25 % of carbon : Other
  • 7214 99 71Other : Other : Containing by weight 0,25 % or more of carbon : Of a circular cross-section measuring in diameter : 80 mm or more
  • 7214 99 79Other : Other : Containing by weight 0,25 % or more of carbon : Of a circular cross-section measuring in diameter : Less than 80 mm
  • 7214 99 95Other : Other : Containing by weight 0,25 % or more of carbon : Other

7215Other bars and rods of iron or non-alloy steel

  • 7215 10 00Of free-cutting steel, not further worked than cold-formed or cold-finished
  • 7215 50 11Other, not further worked than cold-formed or cold-finished : Containing by weight less than 0,25 % of carbon : Of rectangular (other than square) cross-section
  • 7215 50 19Other, not further worked than cold-formed or cold-finished : Containing by weight less than 0,25 % of carbon : Other
  • 7215 50 80Other, not further worked than cold-formed or cold-finished : Containing by weight 0,25 % or more of carbon
  • 7215 90 00Other

7216Angles, shapes and sections of iron or non-alloy steel

  • 7216 10 00U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
  • 7216 21 00L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm : L sections
  • 7216 22 00L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm : T sections
  • 7216 31 10U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : U sections : Of a height of 80 mm or more but not exceeding 220 mm
  • 7216 31 90U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : U sections : Of a height exceeding 220 mm
  • 7216 32 11U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : I sections : Of a height of 80 mm or more but not exceeding 220 mm : With parallel flange faces
  • 7216 32 19U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : I sections : Of a height of 80 mm or more but not exceeding 220 mm : Other
  • 7216 32 91U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : I sections : Of a height exceeding 220 mm : With parallel flange faces
  • 7216 32 99U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : I sections : Of a height exceeding 220 mm : Other
  • 7216 33 10U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : H sections : Of a height of 80 mm or more but not exceeding 180 mm
  • 7216 33 90U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : H sections : Of a height exceeding 180 mm
  • 7216 40 10L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : L sections
  • 7216 40 90L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : T sections
  • 7216 50 10Other angles, shapes and sections, not further worked than hot-rolled, hot- drawn or extruded : With a cross-section which is capable of being enclosed in a square the side of which is 80 mm
  • 7216 50 91Other angles, shapes and sections, not further worked than hot-rolled, hot- drawn or extruded : Other : Bulb flats
  • 7216 50 99Other angles, shapes and sections, not further worked than hot-rolled, hot- drawn or extruded : Other : Other
  • 7216 61 10Angles, shapes and sections, not further worked than cold-formed or cold- finished : Obtained from flat-rolled products : C, L, U, Z, omega or open-ended sections
  • 7216 61 90Angles, shapes and sections, not further worked than cold-formed or cold- finished : Obtained from flat-rolled products : Other
  • 7216 69 00Angles, shapes and sections, not further worked than cold-formed or cold- finished : Other
  • 7216 91 10Other : Cold-formed or cold-finished from flat-rolled products : Profiled (ribbed) sheets
  • 7216 91 80Other : Cold-formed or cold-finished from flat-rolled products : Other
  • 7216 99 00Other : Other

7217Wire of iron or non-alloy steel

  • 7217 10 10Not plated or coated, whether or not polished : Containing by weight less than 0,25 % of carbon : With a maximum cross-sectional dimension of less than 0,8 mm
  • 7217 10 31Not plated or coated, whether or not polished : Containing by weight less than 0,25 % of carbon : With a maximum cross-sectional dimension of 0,8 mm or more : Containing indentations, ribs, grooves or other deformations produced during the rolling process
  • 7217 10 39Not plated or coated, whether or not polished : Containing by weight less than 0,25 % of carbon : With a maximum cross-sectional dimension of 0,8 mm or more : Other
  • 7217 10 50Not plated or coated, whether or not polished : Containing by weight 0,25 % or more but less than 0,6 % of carbon
  • 7217 10 90Not plated or coated, whether or not polished : Containing by weight 0,6 % or more of carbon
  • 7217 20 10Plated or coated with zinc : Containing by weight less than 0,25 % of carbon : With a maximum cross-sectional dimension of less than 0,8 mm
  • 7217 20 30Plated or coated with zinc : Containing by weight less than 0,25 % of carbon : With a maximum cross-sectional dimension of 0,8 mm or more
  • 7217 20 50Plated or coated with zinc : Containing by weight 0,25 % or more but less than 0,6 % of carbon
  • 7217 20 90Plated or coated with zinc : Containing by weight 0,6 % or more of carbon
  • 7217 30 41Plated or coated with other base metals : Containing by weight less than 0,25 % of carbon : Copper-coated
  • 7217 30 49Plated or coated with other base metals : Containing by weight less than 0,25 % of carbon : Other
  • 7217 30 50Plated or coated with other base metals : Containing by weight 0,25 % or more but less than 0,6 % of carbon
  • 7217 30 90Plated or coated with other base metals : Containing by weight 0,6 % or more of carbon
  • 7217 90 20Other : Containing by weight less than 0,25 % of carbon
  • 7217 90 50Other : Containing by weight 0,25 % or more but less than 0,6 % of carbon
  • 7217 90 90Other : Containing by weight 0,6 % or more of carbon

7218Stainless steel in ingots or other primary forms; semi-finished products of stainless steel

  • 7218 10 00Ingots and other primary forms
  • 7218 91 10Other : Of rectangular (other than square) cross-section : Containing by weight 2,5 % or more of nickel
  • 7218 91 80Other : Of rectangular (other than square) cross-section : Containing by weight less than 2,5 % of nickel
  • 7218 99 11Other : Other : Of square cross-section : Rolled or obtained by continous casting
  • 7218 99 19Other : Other : Of square cross-section : Forged
  • 7218 99 20Other : Other : Other : Rolled or obtained by continuous casting
  • 7218 99 80Other : Other : Other : Forged

7219Flat-rolled products of stainless steel, of a width of 600 mm or more

  • 7219 11 00Not further worked than hot-rolled, in coils : Of a thickness exceeding 10 mm
  • 7219 12 10Not further worked than hot-rolled, in coils : Of a thickness of 4,75 mm or more but not exceeding 10 mm : Containing by weight 2,5 % or more of nickel
  • 7219 12 90Not further worked than hot-rolled, in coils : Of a thickness of 4,75 mm or more but not exceeding 10 mm : Containing by weight less than 2,5 % of nickel
  • 7219 13 10Not further worked than hot-rolled, in coils : Of a thickness of 3 mm or more but less than 4,75 mm : Containing by weight 2,5 % or more of nickel
  • 7219 13 90Not further worked than hot-rolled, in coils : Of a thickness of 3 mm or more but less than 4,75 mm : Containing by weight less than 2,5 % of nickel
  • 7219 14 10Not further worked than hot-rolled, in coils : Of a thickness of less than 3 mm : Containing by weight 2,5 % or more of nickel
  • 7219 14 90Not further worked than hot-rolled, in coils : Of a thickness of less than 3 mm : Containing by weight less than 2,5 % of nickel
  • 7219 21 10Not further worked than hot-rolled, not in coils : Of a thickness exceeding 10 mm : Containing by weight 2,5 % or more of nickel
  • 7219 21 90Not further worked than hot-rolled, not in coils : Of a thickness exceeding 10 mm : Containing by weight less than 2,5 % of nickel
  • 7219 22 10Not further worked than hot-rolled, not in coils : Of a thickness of 4,75 mm or more but not exceeding 10 mm : Containing by weight 2,5 % or more of nickel
  • 7219 22 90Not further worked than hot-rolled, not in coils : Of a thickness of 4,75 mm or more but not exceeding 10 mm : Containing by weight less than 2,5 % of nickel
  • 7219 23 00Not further worked than hot-rolled, not in coils : Of a thickness of 3 mm or more but less than 4,75 mm
  • 7219 24 00Not further worked than hot-rolled, not in coils : Of a thickness of less than 3 mm
  • 7219 31 00Not further worked than cold-rolled (cold-reduced) : Of a thickness of 4,75 mm or more
  • 7219 32 10Not further worked than cold-rolled (cold-reduced) : Of a thickness of 3 mm or more but less than 4,75 mm : Containing by weight 2,5 % or more of nickel
  • 7219 32 90Not further worked than cold-rolled (cold-reduced) : Of a thickness of 3 mm or more but less than 4,75 mm : Containing by weight less than 2,5 % of nickel
  • 7219 33 10Not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 1 mm but less than 3 mm : Containing by weight 2,5 % or more of nickel
  • 7219 33 90Not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 1 mm but less than 3 mm : Containing by weight less than 2,5 % of nickel
  • 7219 34 10Not further worked than cold-rolled (cold-reduced) : Of a thickness of 0,5 mm or more but not exceeding 1 mm : Containing by weight 2,5 % or more of nickel
  • 7219 34 90Not further worked than cold-rolled (cold-reduced) : Of a thickness of 0,5 mm or more but not exceeding 1 mm : Containing by weight less than 2,5 % of nickel
  • 7219 35 10Not further worked than cold-rolled (cold-reduced) : Of a thickness of less than 0,5 mm : Containing by weight 2,5 % or more of nickel
  • 7219 35 90Not further worked than cold-rolled (cold-reduced) : Of a thickness of less than 0,5 mm : Containing by weight less than 2,5 % of nickel
  • 7219 90 20Other : Perforated
  • 7219 90 80Other : Other

7220Flat-rolled products of stainless steel, of a width of less than 600 mm

  • 7220 11 00Not further worked than hot-rolled : Of a thickness of 4,75 mm or more
  • 7220 12 00Not further worked than hot-rolled : Of a thickness of less than 4,75 mm
  • 7220 20 21Not further worked than cold-rolled (cold-reduced) : Of a thickness of 3 mm or more, containing by weight : 2,5 % or more of nickel
  • 7220 20 29Not further worked than cold-rolled (cold-reduced) : Of a thickness of 3 mm or more, containing by weight : Less than 2,5 % of nickel
  • 7220 20 41Not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight : 2,5 % or more of nickel
  • 7220 20 49Not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight : Less than 2,5 % of nickel
  • 7220 20 81Not further worked than cold-rolled (cold-reduced) : Of a thickness not exceeding 0,35 mm, containing by weight : 2,5 % or more of nickel
  • 7220 20 89Not further worked than cold-rolled (cold-reduced) : Of a thickness not exceeding 0,35 mm, containing by weight : Less than 2,5 % of nickel
  • 7220 90 20Other : Perforated
  • 7220 90 80Other : Other

7221Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel

  • 7221 00 10Containing by weight 2,5 % or more of nickel
  • 7221 00 90Containing by weight less than 2,5 % of nickel

7222Other bars and rods of stainless steel; angles, shapes and sections of stainless steel

  • 7222 11 11Bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Of circular cross-section : Of a diameter of 80 mm or more, containing by weight : 2,5 % or more of nickel
  • 7222 11 19Bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Of circular cross-section : Of a diameter of 80 mm or more, containing by weight : Less than 2,5 % of nickel
  • 7222 11 81Bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Of circular cross-section : Of a diameter of less than 80 mm, containing by weight : 2,5 % or more of nickel
  • 7222 11 89Bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Of circular cross-section : Of a diameter of less than 80 mm, containing by weight : Less than 2,5 % of nickel
  • 7222 19 10Bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Other : Containing by weight 2,5 % or more of nickel
  • 7222 19 90Bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Other : Containing by weight less than 2,5 % of nickel
  • 7222 20 11Bars and rods, not further worked than cold-formed or cold-finished : Of circular cross-section : Of a diameter of 80 mm or more, containing by weight : 2,5 % or more of nickel
  • 7222 20 19Bars and rods, not further worked than cold-formed or cold-finished : Of circular cross-section : Of a diameter of 80 mm or more, containing by weight : Less than 2,5 % of nickel
  • 7222 20 21Bars and rods, not further worked than cold-formed or cold-finished : Of circular cross-section : Of a diameter of 25 mm or more, but less than 80 mm, containing by weight : 2,5 % or more of nickel
  • 7222 20 29Bars and rods, not further worked than cold-formed or cold-finished : Of circular cross-section : Of a diameter of 25 mm or more, but less than 80 mm, containing by weight : Less than 2,5 % of nickel
  • 7222 20 31Bars and rods, not further worked than cold-formed or cold-finished : Of circular cross-section : Of a diameter of less than 25 mm, containing by weight : 2,5 % or more of nickel
  • 7222 20 39Bars and rods, not further worked than cold-formed or cold-finished : Of circular cross-section : Of a diameter of less than 25 mm, containing by weight : Less than 2,5 % of nickel
  • 7222 20 81Bars and rods, not further worked than cold-formed or cold-finished : Other, containing by weight : 2,5 % or more of nickel
  • 7222 20 89Bars and rods, not further worked than cold-formed or cold-finished : Other, containing by weight : Less than 2,5 % of nickel
  • 7222 30 51Other bars and rods : Forged, containing by weight : 2,5 % or more of nickel
  • 7222 30 91Other bars and rods : Forged, containing by weight : Less than 2,5 % of nickel
  • 7222 30 97Other bars and rods : Other
  • 7222 40 10Angles, shapes and sections : Not further worked than hot-rolled, hot-drawn or extruded
  • 7222 40 50Angles, shapes and sections : Not further worked than cold-formed or cold-finished
  • 7222 40 90Angles, shapes and sections : Other

7223Wire of stainless steel

  • 7223 00 11Containing by weight 2,5 % or more of nickel : Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium
  • 7223 00 19Containing by weight 2,5 % or more of nickel : Other
  • 7223 00 91Containing by weight less than 2,5 % of nickel : Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium
  • 7223 00 99Containing by weight less than 2,5 % of nickel : Other

7224Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel

  • 7224 10 10Ingots and other primary forms : Of tool steel
  • 7224 10 90Ingots and other primary forms : Other
  • 7224 90 02Other : Of tool steel
  • 7224 90 03Other : Other : Of rectangular (including square) cross-section : Hot-rolled or obtained by continuous casting : The width measuring less than twice the thickness : Of high-speed steel
  • 7224 90 05Other : Other : Of rectangular (including square) cross-section : Hot-rolled or obtained by continuous casting : The width measuring less than twice the thickness : Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
  • 7224 90 07Other : Other : Of rectangular (including square) cross-section : Hot-rolled or obtained by continuous casting : The width measuring less than twice the thickness : Other
  • 7224 90 14Other : Other : Of rectangular (including square) cross-section : Hot-rolled or obtained by continuous casting : Other
  • 7224 90 18Other : Other : Of rectangular (including square) cross-section : Forged
  • 7224 90 31Other : Other : Other : Hot-rolled or obtained by continuous casting : Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
  • 7224 90 38Other : Other : Other : Hot-rolled or obtained by continuous casting : Other
  • 7224 90 90Other : Other : Other : Forged

7225Flat-rolled products of other alloy steel, of a width of 600 mm or more

  • 7225 11 00Of silicon-electrical steel : Grain-oriented
  • 7225 19 10Of silicon-electrical steel : Other : Hot-rolled
  • 7225 19 90Of silicon-electrical steel : Other : Cold-rolled
  • 7225 30 10Other, not further worked than hot-rolled, in coils : Of tool steel
  • 7225 30 30Other, not further worked than hot-rolled, in coils : Of high-speed steel
  • 7225 30 90Other, not further worked than hot-rolled, in coils : Other
  • 7225 40 12Other, not further worked than hot-rolled, not in coils : Of tool steel
  • 7225 40 15Other, not further worked than hot-rolled, not in coils : Of high-speed steel
  • 7225 40 40Other, not further worked than hot-rolled, not in coils : Other : Of a thickness exceeding 10 mm
  • 7225 40 60Other, not further worked than hot-rolled, not in coils : Other : Of a thickness of 4,75 mm or more but not exceeding 10 mm
  • 7225 40 90Other, not further worked than hot-rolled, not in coils : Other : Of a thickness of less than 4,75 mm
  • 7225 50 20Other, not further worked than cold-rolled (cold-reduced) : Of high-speed steel
  • 7225 50 80Other, not further worked than cold-rolled (cold-reduced) : Other
  • 7225 91 00Other : Electrolytically plated or coated with zinc
  • 7225 92 00Other : Otherwise plated or coated with zinc
  • 7225 99 00Other : Other

7226Flat-rolled products of other alloy steel, of a width of less than 600 mm

  • 7226 11 00Of silicon-electrical steel : Grain-oriented
  • 7226 19 10Of silicon-electrical steel : Other : Not further worked than hot-rolled
  • 7226 19 80Of silicon-electrical steel : Other : Other
  • 7226 20 00Of high-speed steel
  • 7226 91 20Other : Not further worked than hot-rolled : Of tool steel
  • 7226 91 91Other : Not further worked than hot-rolled : Other : Of a thickness of 4,75 mm or more
  • 7226 91 99Other : Not further worked than hot-rolled : Other : Of a thickness of less than 4,75 mm
  • 7226 92 00Other : Not further worked than cold-rolled (cold-reduced)
  • 7226 99 10Other : Other : Electrolytically plated or coated with zinc
  • 7226 99 30Other : Other : Otherwise plated or coated with zinc
  • 7226 99 70Other : Other : Other

7227Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel

  • 7227 10 00Of high-speed steel
  • 7227 20 00Of silico-manganese steel
  • 7227 90 10Other : Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
  • 7227 90 50Other : Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
  • 7227 90 95Other : Other

7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel

  • 7228 10 20Bars and rods, of high-speed steel : Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
  • 7228 10 50Bars and rods, of high-speed steel : Forged
  • 7228 10 90Bars and rods, of high-speed steel : Other
  • 7228 20 10Bars and rods, of silico-manganese steel : Of rectangular (other than square) cross-section, hot-rolled on four faces
  • 7228 20 91Bars and rods, of silico-manganese steel : Other : Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
  • 7228 20 99Bars and rods, of silico-manganese steel : Other : Other
  • 7228 30 20Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Of tool steel
  • 7228 30 41Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum : Of circular cross-section of a diameter of 80 mm or more
  • 7228 30 49Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum : Other
  • 7228 30 61Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Other : Of circular cross-section, of a diameter of : 80 mm or more
  • 7228 30 69Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Other : Of circular cross-section, of a diameter of : Less than 80 mm
  • 7228 30 70Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Other : Of rectangular (other than square) cross-section, hot-rolled on four faces
  • 7228 30 89Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded : Other : Other
  • 7228 40 10Other bars and rods, not further worked than forged : Of tool steel
  • 7228 40 90Other bars and rods, not further worked than forged : Other
  • 7228 50 20Other bars and rods, not further worked than cold-formed or cold-finished : Of tool steel
  • 7228 50 40Other bars and rods, not further worked than cold-formed or cold-finished : Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
  • 7228 50 61Other bars and rods, not further worked than cold-formed or cold-finished : Other : Of circular cross-section, of a diameter of : 80 mm or more
  • 7228 50 69Other bars and rods, not further worked than cold-formed or cold-finished : Other : Of circular cross-section, of a diameter of : Less than 80 mm
  • 7228 50 80Other bars and rods, not further worked than cold-formed or cold-finished : Other : Other
  • 7228 60 20Other bars and rods : Of tool steel
  • 7228 60 80Other bars and rods : Other
  • 7228 70 10Angles, shapes and sections : Not further worked than hot-rolled, hot-drawn or extruded
  • 7228 70 90Angles, shapes and sections : Other
  • 7228 80 00Hollow drill bars and rods

7229Wire of other alloy steel

  • 7229 20 00Of silico-manganese steel
  • 7229 90 20Other : Of high-speed steel
  • 7229 90 50Other : Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
  • 7229 90 90Other : Other

7301Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel

7302Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails

  • 7302 10 10Rails : Current-conducting, with parts of non-ferrous metal
  • 7302 10 22Rails : Other : New : Vignole rails : Of a weight per metre of 36 kg or more
  • 7302 10 28Rails : Other : New : Vignole rails : Of a weight per metre of less than 36 kg
  • 7302 10 40Rails : Other : New : Grooved rails
  • 7302 10 50Rails : Other : New : Other
  • 7302 10 90Rails : Other : Used
  • 7302 30 00Switch blades, crossing frogs, point rods and other crossing pieces
  • 7302 40 00Fish-plates and sole plates
  • 7302 90 00Other

7303Tubes, pipes and hollow profiles, of cast iron

7304Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel

  • 7304 11 00Line pipe of a kind used for oil or gas pipelines : Of stainless steel
  • 7304 19 10Line pipe of a kind used for oil or gas pipelines : Other : Of an external diameter not exceeding 168,3 mm
  • 7304 19 30Line pipe of a kind used for oil or gas pipelines : Other : Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm
  • 7304 19 90Line pipe of a kind used for oil or gas pipelines : Other : Of an external diameter exceeding 406,4 mm
  • 7304 22 00Casing, tubing and drill pipe, of a kind used in drilling for oil or gas : Drill pipe of stainless steel
  • 7304 23 00Casing, tubing and drill pipe, of a kind used in drilling for oil or gas : Other drill pipe
  • 7304 24 00Casing, tubing and drill pipe, of a kind used in drilling for oil or gas : Other, of stainless steel
  • 7304 29 10Casing, tubing and drill pipe, of a kind used in drilling for oil or gas : Other : Of an external diameter not exceeding 168,3 mm
  • 7304 29 30Casing, tubing and drill pipe, of a kind used in drilling for oil or gas : Other : Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm
  • 7304 29 90Casing, tubing and drill pipe, of a kind used in drilling for oil or gas : Other : Of an external diameter exceeding 406,4 mm
  • 7304 31 20Other, of circular cross-section, of iron or non-alloy steel : Cold-drawn or cold-rolled (cold-reduced) : Precision tubes
  • 7304 31 80Other, of circular cross-section, of iron or non-alloy steel : Cold-drawn or cold-rolled (cold-reduced) : Other
  • 7304 39 50Other, of circular cross-section, of iron or non-alloy steel : Other : Threaded or threadable tubes (gas pipe)
  • 7304 39 82Other, of circular cross-section, of iron or non-alloy steel : Other : Other, of an external diameter : Not exceeding 168,3 mm
  • 7304 39 83Other, of circular cross-section, of iron or non-alloy steel : Other : Other, of an external diameter : Exceeding 168,3 mm but not exceeding 406,4 mm
  • 7304 39 88Other, of circular cross-section, of iron or non-alloy steel : Other : Other, of an external diameter : Exceeding 406,4 mm
  • 7304 41 00Other, of circular cross-section, of stainless steel : Cold-drawn or cold-rolled (cold-reduced)
  • 7304 49 83Other, of circular cross-section, of stainless steel : Other : Of an external diameter not exceeding 168,3 mm
  • 7304 49 85Other, of circular cross-section, of stainless steel : Other : Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm
  • 7304 49 89Other, of circular cross-section, of stainless steel : Other : Of an external diameter exceeding 406,4 mm
  • 7304 51 10Other, of circular cross-section, of other alloy steel : Cold-drawn or cold-rolled (cold-reduced) : Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
  • 7304 51 81Other, of circular cross-section, of other alloy steel : Cold-drawn or cold-rolled (cold-reduced) : Other : Precision tubes
  • 7304 51 89Other, of circular cross-section, of other alloy steel : Cold-drawn or cold-rolled (cold-reduced) : Other : Other
  • 7304 59 30Other, of circular cross-section, of other alloy steel : Other : Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
  • 7304 59 82Other, of circular cross-section, of other alloy steel : Other : Other : Of an external diameter not exceeding 168,3 mm
  • 7304 59 83Other, of circular cross-section, of other alloy steel : Other : Other : Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm
  • 7304 59 89Other, of circular cross-section, of other alloy steel : Other : Other : Of an external diameter exceeding 406,4 mm
  • 7304 90 00Other

7305Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406,4 mm, of iron or steel

  • 7305 11 00Line pipe of a kind used for oil or gas pipelines : Longitudinally submerged arc welded
  • 7305 12 00Line pipe of a kind used for oil or gas pipelines : Other, longitudinally welded
  • 7305 19 00Line pipe of a kind used for oil or gas pipelines : Other
  • 7305 20 00Casing of a kind used in drilling for oil or gas
  • 7305 31 00Other, welded : Longitudinally welded
  • 7305 39 00Other, welded : Other
  • 7305 90 00Other

7306Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel

  • 7306 11 00Line pipe of a kind used for oil or gas pipelines : Welded, of stainless steel
  • 7306 19 00Line pipe of a kind used for oil or gas pipelines : Other
  • 7306 21 00Casing and tubing of a kind used in drilling for oil or gas : Welded, of stainless steel
  • 7306 29 00Casing and tubing of a kind used in drilling for oil or gas : Other
  • 7306 30 12Other, welded, of circular cross-section, of iron or non-alloy steel : Precision tubes : Cold-drawn or cold-rolled (cold-reduced)
  • 7306 30 18Other, welded, of circular cross-section, of iron or non-alloy steel : Precision tubes : Other
  • 7306 30 41Other, welded, of circular cross-section, of iron or non-alloy steel : Other : Threaded or threadable tubes (gas pipe) : Plated or coated with zinc
  • 7306 30 49Other, welded, of circular cross-section, of iron or non-alloy steel : Other : Threaded or threadable tubes (gas pipe) : Other
  • 7306 30 72Other, welded, of circular cross-section, of iron or non-alloy steel : Other : Other, of an external diameter : Not exceeding 168,3 mm : Plated or coated with zinc
  • 7306 30 77Other, welded, of circular cross-section, of iron or non-alloy steel : Other : Other, of an external diameter : Not exceeding 168,3 mm : Other
  • 7306 30 80Other, welded, of circular cross-section, of iron or non-alloy steel : Other : Other, of an external diameter : Exceeding 168,3 mm but not exceeding 406,4 mm
  • 7306 40 20Other, welded, of circular cross-section, of stainless steel : Cold-drawn or cold-rolled (cold-reduced)
  • 7306 40 80Other, welded, of circular cross-section, of stainless steel : Other
  • 7306 50 21Other, welded, of circular cross-section, of other alloy steel : Precision tubes : Cold-drawn or cold-rolled (cold-reduced)
  • 7306 50 29Other, welded, of circular cross-section, of other alloy steel : Precision tubes : Other
  • 7306 50 80Other, welded, of circular cross-section, of other alloy steel : Other
  • 7306 61 10Other, welded, of non-circular cross-section : Of square or rectangular cross-section : Of stainless steel
  • 7306 61 92Other, welded, of non-circular cross-section : Of square or rectangular cross-section : Other : With a wall thickness not exceeding 2 mm
  • 7306 61 99Other, welded, of non-circular cross-section : Of square or rectangular cross-section : Other : With a wall thickness exceeding 2 mm
  • 7306 69 10Other, welded, of non-circular cross-section : Of other non-circular cross-section : Of stainless steel
  • 7306 69 90Other, welded, of non-circular cross-section : Of other non-circular cross-section : Other
  • 7306 90 00Other

7307Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel

  • 7307 11 10Cast fittings : Of non-malleable cast iron : Of a kind used in pressure systems
  • 7307 11 90Cast fittings : Of non-malleable cast iron : Other
  • 7307 19 10Cast fittings : Other : Of cast iron
  • 7307 19 90Cast fittings : Other : Other
  • 7307 21 00Other, of stainless steel : Flanges
  • 7307 22 10Other, of stainless steel : Threaded elbows, bends and sleeves : Sleeves
  • 7307 22 90Other, of stainless steel : Threaded elbows, bends and sleeves : Elbows and bends
  • 7307 23 10Other, of stainless steel : Butt welding fittings : Elbows and bends
  • 7307 23 90Other, of stainless steel : Butt welding fittings : Other
  • 7307 29 10Other, of stainless steel : Other : Threaded
  • 7307 29 80Other, of stainless steel : Other : Other
  • 7307 91 00Other : Flanges
  • 7307 92 10Other : Threaded elbows, bends and sleeves : Sleeves
  • 7307 92 90Other : Threaded elbows, bends and sleeves : Elbows and bends
  • 7307 93 11Other : Butt welding fittings : With greatest external diameter not exceeding 609,6 mm : Elbows and bends
  • 7307 93 19Other : Butt welding fittings : With greatest external diameter not exceeding 609,6 mm : Other
  • 7307 93 91Other : Butt welding fittings : With greatest external diameter exceeding 609,6 mm : Elbows and bends
  • 7307 93 99Other : Butt welding fittings : With greatest external diameter exceeding 609,6 mm : Other
  • 7307 99 10Other : Other : Threaded
  • 7307 99 80Other : Other : Other

7308Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel

  • 7308 10 00Bridges and bridge-sections
  • 7308 20 10Towers and lattice masts : Tubular wind turbine steel towers and tower-sections
  • 7308 20 90Towers and lattice masts : Other
  • 7308 30 00Doors, windows and their frames and thresholds for doors
  • 7308 40 00Equipment for scaffolding, shuttering, propping or pit-propping
  • 7308 90 51Other : Solely or principally of sheet : Panels comprising two walls of profiled (ribbed) sheet with an insulating core
  • 7308 90 59Other : Solely or principally of sheet : Other
  • 7308 90 98Other : Other

7309Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment

  • 7309 00 10For gases (other than compressed or liquefied gas)
  • 7309 00 30For liquids : Lined or heat-insulated
  • 7309 00 51For liquids : Other, of a capacity : Exceeding 100 000 l
  • 7309 00 59For liquids : Other, of a capacity : Not exceeding 100 000 l
  • 7309 00 90For solids

7310Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment

  • 7310 10 00Of a capacity of 50 l or more
  • 7310 21 11Of a capacity of less than 50 l : Cans which are to be closed by soldering or crimping : Cans of a kind used for preserving food
  • 7310 21 19Of a capacity of less than 50 l : Cans which are to be closed by soldering or crimping : Cans of a kind used for preserving drink
  • 7310 21 91Of a capacity of less than 50 l : Cans which are to be closed by soldering or crimping : Other, with a wall thickness of : Less than 0,5 mm
  • 7310 21 99Of a capacity of less than 50 l : Cans which are to be closed by soldering or crimping : Other, with a wall thickness of : 0,5 mm or more
  • 7310 29 10Of a capacity of less than 50 l : Other : With a wall thickness of less than 0,5 mm
  • 7310 29 90Of a capacity of less than 50 l : Other : With a wall thickness of 0,5 mm or more

7311Containers for compressed or liquefied gas, of iron or steel

  • 7311 00 11Seamless : For a pressure of 165 bar or more, of a capacity of : Less than 20 l
  • 7311 00 13Seamless : For a pressure of 165 bar or more, of a capacity of : 20 l or more but not more than 50 l
  • 7311 00 19Seamless : For a pressure of 165 bar or more, of a capacity of : More than 50 l
  • 7311 00 30Seamless : Other
  • 7311 00 91Other, of a capacity of : Less than 1 000 l
  • 7311 00 99Other, of a capacity of : 1 000 l or more

7318Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel

  • 7318 11 00Threaded articles : Coach screws
  • 7318 12 10Threaded articles : Other wood screws : Of stainless steel
  • 7318 12 90Threaded articles : Other wood screws : Other
  • 7318 13 00Threaded articles : Screw hooks and screw rings
  • 7318 14 10Threaded articles : Self-tapping screws : Of stainless steel
  • 7318 14 91Threaded articles : Self-tapping screws : Other : Spaced-thread screws
  • 7318 14 99Threaded articles : Self-tapping screws : Other : Other
  • 7318 15 20Threaded articles : Other screws and bolts, whether or not with their nuts or washers : For fixing railway track construction material
  • 7318 15 35Threaded articles : Other screws and bolts, whether or not with their nuts or washers : Other : Without heads : Of stainless steel
  • 7318 15 42Threaded articles : Other screws and bolts, whether or not with their nuts or washers : Other : Without heads : Other, with a tensile strength : Of less than 800 MPa
  • 7318 15 48Threaded articles : Other screws and bolts, whether or not with their nuts or washers : Other : Without heads : Other, with a tensile strength : Of 800 MPa or more
  • 7318 15 52Threaded articles : Other screws and bolts, whether or not with their nuts or washers : Other : With heads : Slotted or cross-recessed heads : Of stainless steel
  • 7318 15 58Threaded articles : Other screws and bolts, whether or not with their nuts or washers : Other : With heads : Slotted or cross-recessed heads : Other
  • 7318 15 62Threaded articles : Other screws and bolts, whether or not with their nuts or washers : Other : With heads : Hexagonal-socket heads : Of stainless steel
  • 7318 15 68Threaded articles : Other screws and bolts, whether or not with their nuts or washers : Other : With heads : Hexagonal-socket heads : Other
  • 7318 15 75Threaded articles : Other screws and bolts, whether or not with their nuts or washers : Other : With heads : Hexagonal heads : Of stainless steel
  • 7318 15 82Threaded articles : Other screws and bolts, whether or not with their nuts or washers : Other : With heads : Hexagonal heads : Other, with a tensile strength : Of less than 800 MPa
  • 7318 15 88Threaded articles : Other screws and bolts, whether or not with their nuts or washers : Other : With heads : Hexagonal heads : Other, with a tensile strength : Of 800 MPa or more
  • 7318 15 95Threaded articles : Other screws and bolts, whether or not with their nuts or washers : Other : With heads : Other
  • 7318 16 31Threaded articles : Nuts : Of stainless steel : Blind rivet nuts
  • 7318 16 39Threaded articles : Nuts : Of stainless steel : Other
  • 7318 16 40Threaded articles : Nuts : Other : Blind rivet nuts
  • 7318 16 60Threaded articles : Nuts : Other : Self-locking nuts
  • 7318 16 92Threaded articles : Nuts : Other : Other, with an inside diameter : Not exceeding 12 mm
  • 7318 16 99Threaded articles : Nuts : Other : Other, with an inside diameter : Exceeding 12 mm
  • 7318 19 00Threaded articles : Other
  • 7318 21 00Non-threaded articles : Spring washers and other lock washers
  • 7318 22 00Non-threaded articles : Other washers
  • 7318 23 00Non-threaded articles : Rivets
  • 7318 24 00Non-threaded articles : Cotters and cotter pins
  • 7318 29 00Non-threaded articles : Other

7326Other articles of iron or steel

  • 7326 11 00Forged or stamped, but not further worked : Grinding balls and similar articles for mills
  • 7326 19 10Forged or stamped, but not further worked : Other : Open-die forged
  • 7326 19 90Forged or stamped, but not further worked : Other : Other
  • 7326 20 00Articles of iron or steel wire
  • 7326 90 30Other : Ladders and steps
  • 7326 90 40Other : Pallets and similar platforms for handling goods
  • 7326 90 50Other : Reels for cables, piping and the like
  • 7326 90 60Other : Non-mechanical ventilators, guttering, hooks and like articles used in the building industry
  • 7326 90 92Other : Other articles of iron or steel : Open-die forged
  • 7326 90 94Other : Other articles of iron or steel : Closed-die forged
  • 7326 90 96Other : Other articles of iron or steel : Sintered
  • 7326 90 98Other : Other articles of iron or steel : Other

Aluminium

7601Unwrought aluminium

7603Aluminium powders and flakes

7604Aluminium bars, rods and profiles

7605Aluminium wire

  • 7605 11 00Of aluminium, not alloyed : Of which the maximum cross-sectional dimension exceeds 7 mm
  • 7605 19 00Of aluminium, not alloyed : Other
  • 7605 21 00Of aluminium alloys : Of which the maximum cross-sectional dimension exceeds 7 mm
  • 7605 29 00Of aluminium alloys : Other

7606Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm

  • 7606 11 30Rectangular (including square) : Of aluminium, not alloyed : Aluminium Composite Panel
  • 7606 11 50Rectangular (including square) : Of aluminium, not alloyed : Other : Painted, varnished or coated with plastics
  • 7606 11 91Rectangular (including square) : Of aluminium, not alloyed : Other : Other, of a thickness of : Less than 3 mm
  • 7606 11 93Rectangular (including square) : Of aluminium, not alloyed : Other : Other, of a thickness of : Not less than 3 mm but less than 6 mm
  • 7606 11 99Rectangular (including square) : Of aluminium, not alloyed : Other : Other, of a thickness of : Not less than 6 mm
  • 7606 12 11Rectangular (including square) : Of aluminium alloys : Beverage can body stock, end stock and tab stock : Beverage can body stock
  • 7606 12 19Rectangular (including square) : Of aluminium alloys : Beverage can body stock, end stock and tab stock : Beverage can end stock and tab stock
  • 7606 12 30Rectangular (including square) : Of aluminium alloys : Aluminium Composite Panel
  • 7606 12 50Rectangular (including square) : Of aluminium alloys : Other : Painted, varnished or coated with plastics
  • 7606 12 92Rectangular (including square) : Of aluminium alloys : Other : Other, of a thickness of : Less than 3 mm
  • 7606 12 93Rectangular (including square) : Of aluminium alloys : Other : Other, of a thickness of : Not less than 3 mm but less than 6 mm
  • 7606 12 99Rectangular (including square) : Of aluminium alloys : Other : Other, of a thickness of : Not less than 6 mm
  • 7606 91 00Other : Of aluminium, not alloyed
  • 7606 92 00Other : Of aluminium alloys

7607Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm

  • 7607 11 11Not backed : Rolled but not further worked : Of a thickness of less than 0,021 mm : In rolls of a weight not exceeding 10 kg
  • 7607 11 19Not backed : Rolled but not further worked : Of a thickness of less than 0,021 mm : Other
  • 7607 11 90Not backed : Rolled but not further worked : Of a thickness of not less than 0,021 mm but not more than 0,2 mm
  • 7607 19 10Not backed : Other : Of a thickness of less than 0,021 mm
  • 7607 19 90Not backed : Other : Of a thickness of not less than 0,021 mm but not more than 0,2 mm
  • 7607 20 10Backed : Of a thickness (excluding any backing) of less than 0,021 mm
  • 7607 20 91Backed : Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm : Aluminium Composite Panel
  • 7607 20 99Backed : Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm : Other

7608Aluminium tubes and pipes

7609Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves)

  • 7609 00 00Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves)

7610Aluminium structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge- sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures

  • 7610 10 00Doors, windows and their frames and thresholds for doors
  • 7610 90 10Other : Bridges and bridge-sections, towers and lattice masts
  • 7610 90 90Other : Other

7611Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment

  • 7611 00 00Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment

7612Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment

7613Aluminium containers for compressed or liquefied gas

  • 7613 00 00Aluminium containers for compressed or liquefied gas

7614Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated

7616Other articles of aluminium

  • 7616 10 00Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles
  • 7616 91 00Other : Cloth, grill, netting and fencing, of aluminium wire
  • 7616 99 10Other : Other : Cast
  • 7616 99 90Other : Other : Other

Fertilisers

2808Nitric acid; sulphonitric acids

2814Ammonia, anhydrous or in aqueous solution

2834Nitrites; nitrates

3102Mineral or chemical fertilisers, nitrogenous

  • 3102 10 12Urea, whether or not in aqueous solution : Urea containing more than 45 % by weight of nitrogen on the dry anhydrous product : In aqueous solution, containing at least 31,8 % but not exceeding 33,2 % by weight of urea
  • 3102 10 15Urea, whether or not in aqueous solution : Urea containing more than 45 % by weight of nitrogen on the dry anhydrous product : In aqueous solution, containing more than 33,2 % but not exceeding 55 % by weight of urea
  • 3102 10 19Urea, whether or not in aqueous solution : Urea containing more than 45 % by weight of nitrogen on the dry anhydrous product : Other
  • 3102 10 90Urea, whether or not in aqueous solution : Other
  • 3102 21 00Ammonium sulphate; double salts and mixtures of ammonium sulphate and ammonium nitrate : Ammonium sulphate
  • 3102 29 00Ammonium sulphate; double salts and mixtures of ammonium sulphate and ammonium nitrate : Other
  • 3102 30 10Ammonium nitrate, whether or not in aqueous solution : In aqueous solution
  • 3102 30 90Ammonium nitrate, whether or not in aqueous solution : Other
  • 3102 40 10Mixtures of ammonium nitrate with calcium carbonate or other inorganic non- fertilising substances : With a nitrogen content not exceeding 28 % by weight
  • 3102 40 90Mixtures of ammonium nitrate with calcium carbonate or other inorganic non- fertilising substances : With a nitrogen content exceeding 28 % by weight
  • 3102 50 00Sodium nitrate
  • 3102 60 00Double salts and mixtures of calcium nitrate and ammonium nitrate
  • 3102 80 00Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution
  • 3102 90 00Other, including mixtures not specified in the foregoing subheadings

3105Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium; other fertilisers; goods of this chapter in tablets or similar forms or in packages of a gross weight not exceeding 10 kg

  • 3105 10 00Goods of this chapter in tablets or similar forms or in packages of a gross weight not exceeding 10 kg
  • 3105 20 10Mineral or chemical fertilisers containing the three fertilising elements nitrogen, phosphorus and potassium : With a nitrogen content exceeding 10 % by weight on the dry anhydrous product
  • 3105 20 90Mineral or chemical fertilisers containing the three fertilising elements nitrogen, phosphorus and potassium : Other
  • 3105 30 00Diammonium hydrogenorthophosphate (diammonium phosphate)
  • 3105 40 00Ammonium dihydrogenorthophosphate (monoammonium phosphate) and mixtures thereof with diammonium hydrogenorthophosphate (diammonium phosphate)
  • 3105 51 00Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus : Containing nitrates and phosphates
  • 3105 59 00Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus : Other
  • 3105 90 20Other : With a nitrogen content exceeding 10 % by weight on the dry anhydrous product
  • 3105 90 80Other : Other

Chemicals

2804Hydrogen, rare gases and other non-metals

Electricity

2716Electrical energy

More CBAM tools and data