CN 7220 20 29
Flat-rolled products of stainless steel, of a width of less than 600 mm : Not further worked than cold-rolled (cold-reduced) : Of a thickness of 3 mm or more, containing by weight : Less than 2,5 % of nickel
What are the CBAM default values for CN 7220 20 29?
The EU publishes default values for CN 7220 20 29 for 29 countries of origin, from 2.57 to 8.69 tonnes of CO₂e per tonne.
Embedded emissions in tonnes of CO₂e per tonne of the good, as published on 31 Jul 2026. They are shown before the mark-up for the year, which is added when they are used. See the mark-up by year
Only the direct emissions of this good count towards the certificates due.
| Country of origin | Direct | Indirect | Total |
|---|---|---|---|
| Other countries | 5.02 | 5.02 | |
| Algeria | 3.3 | 3.3 | |
| Argentina | 3.52 | 3.52 | |
| Australia | 3.63 | 3.63 | |
| Azerbaijan | 2.57 | 2.57 | |
| Bosnia & Herzegovina | 3.11 | 3.11 | |
| Brazil | 3.32 | 3.32 | |
| Canada | 3.29 | 3.29 | |
| Chile | 2.95 | 2.95 | |
| China | 5.59 | 5.59 | |
| Colombia | 4.15 | 4.15 | |
| India | 6.5 | 6.5 | |
| Indonesia | 8.69 | 8.69 | |
| Iran | 3.2 | 3.2 | |
| Japan | 3.36 | 3.36 | |
| Kazakhstan | 4.86 | 4.86 | |
| Mexico | 3.3 | 3.3 | |
| Myanmar (Burma) | 3.13 | 3.13 | |
| New Zealand | 3.39 | 3.39 | |
| North Macedonia | 2.91 | 2.91 | |
| Philippines | 2.92 | 2.92 | |
| Russia | 3.71 | 3.71 | |
| Serbia | 2.59 | 2.59 | |
| South Africa | 3.89 | 3.89 | |
| South Korea | 3.65 | 3.65 | |
| Turkey | 5.54 | 5.54 | |
| Ukraine | 3.28 | 3.28 | |
| United Kingdom | 3.37 | 3.37 | |
| United States | 3.27 | 3.27 | |
| Uzbekistan | 3.12 | 3.12 |
What are the CBAM benchmarks for CN 7220 20 29?
The benchmark, multiplied by the CBAM factor for the year, is the free allocation deducted from the certificates due. It depends on whether the embedded emissions come from default values or from the producer’s verified actual data. See the CBAM factor by year
| Production route | With default values | With actual emissions |
|---|---|---|
| 1.27(2026–2027) | 0.109 | |
| 1.23(2028–2030) |
In tonnes of CO₂e per tonne of the good. A year range limits a value to goods produced in those years.
Estimate the certificates for an import
Other codes under 7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
- 7220 11 00Not further worked than hot-rolled : Of a thickness of 4,75 mm or more
- 7220 12 00Not further worked than hot-rolled : Of a thickness of less than 4,75 mm
- 7220 20 21Not further worked than cold-rolled (cold-reduced) : Of a thickness of 3 mm or more, containing by weight : 2,5 % or more of nickel
- 7220 20 41Not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight : 2,5 % or more of nickel
- 7220 20 49Not further worked than cold-rolled (cold-reduced) : Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight : Less than 2,5 % of nickel
- 7220 20 81Not further worked than cold-rolled (cold-reduced) : Of a thickness not exceeding 0,35 mm, containing by weight : 2,5 % or more of nickel
- 7220 20 89Not further worked than cold-rolled (cold-reduced) : Of a thickness not exceeding 0,35 mm, containing by weight : Less than 2,5 % of nickel
- 7220 90 20Other : Perforated
- 7220 90 80Other : Other
More CBAM tools and data
- CBAM certificate cost calculatorSee how many CBAM certificates an import requires and what they will cost, using EU default values or your own verified emissions data.
- CBAM deadlinesWhen the CBAM declaration is due, when certificates must be held, surrendered and sold back, and the 50-tonne threshold below which CBAM does not apply.
- CBAM certificate priceThe current price of a CBAM certificate and every price the European Commission has published so far, period by period.
- CBAM phase-in: CBAM factor and mark-up ratesHow the CBAM obligation grows each year as free EU ETS allowances are phased out, and the mark-up added to default values.